EGS
The Grinding Machine is fitted in the Lathe Machine's tool post and the grinding angle is set using the supplied Template.
Dressing of the Grinding Wheel is made using the Dresser fitted in the Template.
Grinding of either Valve Spindles or Valve Seats is possible.
- Precise grinding
- Surface roughness less than Ra 0.4μm
- Easy to operate
- Air driven
- Low noise and light weight
- Used when supported in a Lathe Machine
Data
| |
Suitable for disk diameter:
| 120 mm or less
|
Applicable seat diameter:
| 110mm - 200mm
|
Necessary air pressure:
| 0.6-0.7 MPa
|
Air consumption:
| 1.0m3/m
|
Air hose connection:
| 1/2 PT
|
Air hose diameter:
| 12mm
|
Grinding Motor speed:
| 8,000 min-1
|
Machine weight:
| 5 Kgs
|
Machine size:
| 204mm (L) x 90mm (W) x 240mm (D)
|